|
ALL TOOL RESERVATIONS ARE BOOKED USING OpenCORAL Remote Client
usernames are: firstname_lastname (and all lowercase)
please supply what you would like your password to be
(all passwords must be 6 characters minimum)
The OpenCORAL Remote Client runs on Sun Java J2SE ver. 1.5 or later
NOTE: If there are any problems with equipment, please send details to
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
The following tools are available for online reservations:
Please note -
you must make your online reservation before logging onto the tool.
any user who makes a reservation on any calendar and fails to log into lab access within 30 minutes of said reservation forfeits there reservation slot.
any user logging into a tool where a user has not logged in within the 30 minutes should notate this on the respective calendars.
Please contact
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
or
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
for access to the below calendars.
Zeiss SEM
All Reservations are now made using the RemoteCORAL Client.
Zeiss Neon40 FE-SEM, with Raith Elphy Quantum, scheduling procedure:
1. The Zeiss Neon 40 scheduling will be done on the web calendar
2. Each user will be allowed to have a maximum of two (2) reservations at any time.
3. Maximum reservation duration shall be two (2) hours for METROLOGY work.
For pattern generation with the RAITH EPLHY QUANTUM software, the reservation duration shall be six (6) hours.
Please schedule the writing time on the evening or during week-end as much as possible.
4. Each group (professor’s group, company, etc) shall have a maximum of 3 reservations per day
during the period 8:00AM to 8:00PM.
5. Reservations may not be made beyond 48 hours in advance
6. The tool may be used when not reserved, if your duration of work will not interfere with the next reserved time.
This use of unreserved time shall not count toward the user or the group’s maximum number of slots.
7. Users shall not share or borrow other users’ reservation slots.
8. Users shall be logged onto the tool for the complete duration of their use of the tool.
This includes load, pump-down,scan image, and all other facets of the use of the tool.
When the tool is not logged on the lab access system, it will be considered not in use
and may be addressed by any other user, if their use does not interfere with the next reserved time.
9. Users shall enter complete information into the tool log book each time they use the tool.
10. Tool usage and reservation utilization will be monitored. Book what you need and use what you book.
Tool log book entries will be monitored relative to reservations and lab access usage.
ALD
All Reservations are now made using the RemoteCORAL Client.
KoH Hood
All Reservations are now made using the RemoteCORAL Client.
TEM
- Please Contact
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
for training on the TEM
All Reservations are now made using the RemoteCORAL Client.
All Training Reservations must be booked 48 hours in advance
Training Schedule - Please contact
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
or
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
for general clean-room training & check out.
NEW GENERAL TRAINING REQUEST PROCEDURE:
General Training Requests Will Now Be Made Under The Training Section In openCORAL
Post Request In training section of coral THEN E-Mail
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Include Name / Telephone / Tool / Desired / Conflict Times)
Training Staff Will Then Book and Reply Confirming Your Reservation
GENERAL TRAINING REQUEST PROCEDURE
OpenCORAL has a Training Section:
-North
-South
-Training
No Coral Login Yet? Still Want to look at availability etc..?
User: training
Password training
Can View All sections within CORAL. Only has access to request training is the training section / trainer
All User Accounts can be given Access to these Training Sections by e-mail request.
If Using TRAINING/TRAINING
Make reservation under trainer you desire training from
Include your Name and Tool you desire to receive training on in the “Process” Field
Email MERTRAIN@UTLISTS.UTEXAS
Make Your Request for training on the desired piece of equipment
Include The Following Information In Your E-Mail:
Your Name:
Desired Tool Training:
Telephone Contact Information:
Any Scheduling Restrictions/Conflicts You may have
Once The Training Staff Receive Your e-mail they will then book your training on the requested tool on the respective tool calendar and reply to your e-mail with when the Training Session has been scheduled.
- Log In > Make Reservation On CORAL Trainers Calendar
(Include your Name and Desired Tool In the “Process” Field)
- Email
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(Include Name, Tool, Telephone, Restrictions/Conflicts In Your E-Mail)
- Wait for Trainer to Reserve Tool Time and Respond to your E-mail when Booked
General Training Request Instructions ( DOC ) ( PDF )
Training for the AFM is done by Emmanual Onyegam
Oxford
All Reservations are now made using the RemoteCORAL Client.
IMPRIO 100
All Reservations are now made using the RemoteCORAL Client.
Please contact Marylene Palard or Jesse James for training on the i100
1. Each day will be broken into four, 6-hour time slots.
Time slots shall be 08:00 AM to 2:00 PM, 2 PM to 8 PM, 8 PM to 2 AM and 2 AM to 8 AM.
Reservations shall be made for these time slots.
2. Each individual user may book no more than 3 bookings at one time.
3. The tool will be configured with SFIL and SFIL-R dispensers and nozzles.
Users who require a different set-up will be required to change the tool to their required set-up and return it to normal before finishing.
4. Users that require mult-/consecutive day use of the tool may, upon authorization,
book and use up to 3 days (72 hours) consecutively, but then may not book any reservation within the next 30 days.
5. Unreserved time on the tool is available for use on a first-come basis, and will not count toward a user’s 3 reservation slots.
6. The usage statistics will be audited relative to the bookings on a regular basis.
Penalties will be issued to time wasters:
Unused reservations will result in documentation of tool availability wasted.
Multiple unused reservations will result in a user’s access to the tool being removed.
MJB4
All Reservations are now made using the RemoteCORAL Client.
MA6/BA6
All Reservations are now made using the RemoteCORAL Client.
PlasmaTherm 1
All Reservations are now made using the RemoteCORAL Client.
PlasmaTherm 2
All Reservations are now made using the RemoteCORAL Client.
CHA -
All Reservations are now made using the RemoteCORAL Client.
CHA2
All Reservations are now made using the RemoteCORAL Client.
Scheduling procedure for: MJB4, MA6/BA6, Plasmatherm 1 & 2, CHA 1 & 2
Scheduling Procedure:
1. The equipment scheduling will be done on the web calendar
2. Prime time will be defined as Monday through Friday, 8:00 AM to 10:00 PM.
Off time will be defined as Monday through Friday, 10:00 PM to 8:00 AM and all weekend days.
3. Each individual user may book no more than 2 prime time bookings and 2 off time bookings,
for a total of a maximum of 4 bookings within 48 hours intervals.
4. Each booking may be no more than 2 hours.
A booking may be less than 2 hours if the user does not need a full increment of 2 hours.
5. Reservations may not be made beyond 48 hours in advance
6. There may not be more than 3 prime bookings on the calendar made by persons in a group
(professor’s group, company, etc) within 48 hours intervals.
7. The tool may be used when not reserved, if your duration of work will not interfere with the next reserved time.
This use of unreserved time shall not count toward the user or the group’s maximum number of slots.
8. Users shall not share or borrow other users’ reservation slots.
9. Users shall be logged onto the tool and in the general vicinity for the complete duration of their use of the tool.
This includes load, pump-down, evaporation, and all other facets of the use of the tool.
When the tool is not logged on the lab access system,
it will be considered not in use and may be addressed by any other user,
if their use does not interfere with the next reserved time.
10. Users shall enter complete information into the tool log book each time they use the tool.
New additional rules will be posted shortly concerning use of the ion gun
XRD
All Reservations are now made using the RemoteCORAL Client.
New KJL - Old Calendar: Only use as reference to move your reservations
All Reservations are now made using the RemoteCORAL Client.
New KJL scheduling procedure:
1. Each user will be allowed to have a maximum of two (2) reservations at any time.
2. Reservations may not be made beyond two weeks in advance.
3. Maximum reservation duration for Chamber B shall be three (3) hours. The target in chamber B is a 6-inch Ta target
4. Maximum reservation for Chamber A shall be twelve (12) hours.
5. In Chamber A, right target location, 4-inch Hf target shall not be removed, except in cases of co-sputtering requirements.
6. Target changing shall only be done late in the evening, after reserved slots are over, or after 7:00PM,
which ever is later, and before 03:00 AM or at completion of reserved use, which ever is earlier.
This will afford pump-down time for morning use of the machine.
7. Users shall wear appropriate air purifying respirator when opening the chamber for target changing.
Users shall consult with the MER Facilities Office, Safety Coordinator for specifications on which respirator and cartridges to obtain.
8. Target shields shall not be cleaned in the cleanroom. They shall be removed from the cleanroom for cleaning when required.
9. Users who initiate a target change shall reserve and use the machine the next day, not starting later than 09:00AM.
Users who plan a target change may check with the last reserved user and request they change target for them.
Users shall be willing to change targets for others in this scenario.
10. With the Hf target typically always installed, users who only need to sputter Hf may use the machine when available without reservation,
and that usage shall not count against their reservation slots.
11. Users may use Chamber B without reservation in the event the tool is not in use or within one hour of a reserved slot,
and shall not count that usage against their reservation slots.
12. Users shall not share or borrow other users’ reservation slots.
13. Tool usage and reservation utilization will be monitored. Book what you need and use what you book.
JEOL E-BEAM
- Please contact
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
for Training
All Reservations are now made using the RemoteCORAL Client.
E-beam scheduling procedure:
1. Prime time will be defined as Monday through Friday, 8:00 AM to 10:00 PM.
Off time will be defined as Monday through Friday, 10:00 PM to 8:00 AM and all weekend days.
2. Each individual user may book no more than 2 prime time bookings and 2 off time bookings,
for a total of a maximum of 4 bookings.
3. Each booking may be no more than 4 hours.
A booking may be less than 4 hours if the user does not need a full increment of 4 hours.
The motto of 'Book what you need, and use what you book' will become a standard motto of the e-beam group.
4. There may not be more than 8 bookings on the calendar made by persons in a group (professor)
5. Book what you need and use what you book. The usage statistics will be audited relative to the bookings on a regular basis.
Penalties will be issued to time wasters. Reviewing audit results, a person who starts to calibrate to expose more than 2 hours
into their booked time slot will be considered to have started late and therefore have wasted time.
This will result in the person's bookings being removed from the schedule and that person will have to rebook at the next available time slot.
A person who finishes exposing and therefore finishes their process more than 2 hours before the end of their booked time slot
will also be considered as wasting time. New processes that have unknown exposure times should be discussed with Marylene or Bill prior to being done,
to explain the unknown factor and the reason for longer booking than process.
Repeated exposure finishes more than 2 hours prior to the end of a booking, without convincing reason,
will result in a person's bookings being removed from the schedule.
Second offense penalty will be all bookings removed and the user removed from the e-beam access for one month.
Third offense will result in consultation with the user's professor and determination of the need for that user to have e-beam access at all.
|
